Need help?Do you have a question about the Buderus S120 US and is the answer not in the manual?
General| Fuel Type | Natural Gas or Propane |
|---|---|
| Storage Capacity | 119 gallons |
| Recovery Rate (Natural Gas) | 121 GPH at 90°F rise |
| Recovery Rate (Propane) | 121 GPH at 90°F rise |
| Input (Natural Gas) | 199, 900 BTU/hr |
| Input (Propane) | 199, 900 BTU/hr |
Details the components included with the S120 indirect fired hot water tank.
Specifies requirements for installing the tank in a dry, frost-free room on a level floor.
Outlines critical temperature and pressure values for safe operation of the tank.
Provides instructions for connecting pipes and valves to the tank fittings.
Details installation of temperature sensors and aquastats for tank control.
Describes how to inspect and check the magnesium anode rod for degradation.
Explains how to clean the tank interior and remove scale build-up.
Steps to follow after cleaning, including re-installing components and testing.
To Next Page
