To Next PageTo Next Page
Need help?Do you have a question about the Buderus Logalux SM400/1 and is the answer not in the manual?
General| Capacity | 400 liters |
|---|---|
| Max Operating Pressure | 10 bar |
| Maximum Operating Temperature | 95°C |
| Height | 1750 mm |
| Insulation | Polyurethane foam |
| Connections | 1½ inch |
| Type | Indirect water heater |
Safety guidelines for placing and remodeling the solar water tank.
Explanation of warning symbols and signal words used in the manual.
Covers product applications, installation guidelines, and disposal recommendations.
Description of the tank's components and construction materials.
Details and illustration of the B-Kit components for tank fittings.
Detailed dimensions and connection points for the SM300/1 model.
Detailed dimensions and connection points for the SM400/1 model.
Safe methods for transport and instructions for using a hand dolly.
Crane transport procedures and product placement guidelines with clearances.
Installing SM300/1, including feet and initial sensor setup.
Detailed steps for installing the DHW tank sensor and locking tab.
Procedure for installing the aquastat with mounting bracket and capillary.
Installing SM400/1 and its temperature sensors.
Procedure for installing the tank insulation on the SM400/1 model.
Detailed instructions for water piping connections for both tank models.
Installation of tank kit components like P&T valve and drain valve.
Connecting the solar pump station KS to the solar tank coils.
Connecting tanks for indirect firing and details on serial/parallel coil connections.
Procedures for initial system start-up and information the contractor must provide.
Detailed procedures for system start-up, shutdown, decommissioning, and environmental aspects.
Steps to prepare the solar water tank for cleaning, including safety precautions.
Procedure for cleaning the solar hot water tank, including lime deposit removal.
Annual checks of the magnesium anode rod for wear and tear.
Procedures for replacing the magnesium anode rod on both tank models.
Procedure for reassembling the tank and returning it to operation after cleaning.
List of available spare parts for the SM300/1 and 300/1W models.
Spare parts for the access cover and anode rod assembly for SM300/1 models.
List of available spare parts for the SM400/1 model.
Spare parts for the access cover and anode rod assembly for SM400/1.
Spare parts for the tank jacket system of the SM400/1 model.
