Buderus LT160/1 User Manual

Read carefully before installation and servicing.
Installation and Maintenance Instructions
DHW tanks
Logalux
6 720 810 502-00.2T
LT160/1
LT200/1
LT300/1
6 720 811 745 (2021/10) US/CA
WARNING:
These installation instructions may only be used by
trained fitters and service technicians. Read all
instructions before installing. Perform steps
exactly in the order given. Failure to follow these
instructions can result in severe injury, death or
property damage.

Buderus LT160/1 Specifications

General

Category	Water Heater
Manufacturer	Buderus
Model	LT160/1
Capacity	160 liters
Maximum Operating Pressure	10 bar
Test Pressure	13 bar
Maximum Operating Temperature	95°C
Insulation	Polyurethane foam
Diameter	550 mm
Connections	1"
Material	Steel with enamel coating

Summary

Safety Considerations and Symbol Descriptions

Safety Instructions

Provides critical safety guidelines for installation, servicing, and operation.

Owner and Operator Instructions

Product Information

Performance and Technical Data

Physical and Connection Dimensions

Moving the Tank

Safe Transportation Procedures

Installation

Tank Installation and Location Requirements

Covers general installation, site requirements, clearances, and positioning.

Water Connections

Instructions for connecting the DHW tank to the water system.

Installing B-Kit and T&P Valve

Guides on installing B-kit components and the T&P safety valve.

Installing Temperature Sensor/Aquastat

Guides on installing temperature sensors or aquastats for monitoring.

Start-up Procedure

Commissioning the DHW Tank

Steps for initial startup, filling, and checking the DHW tank after installation.

Shutdown and Frost Protection

Shutting Down the Tank

Frost Protection Shutdown

Maintenance

Preparing for Cleaning

Descaling and Cleaning Procedures

Magnesium Anode Maintenance

Procedures for checking, testing, and replacing the sacrificial magnesium anode.

Startup After Maintenance