Buffalo GM949 - Page 16

To Next Page

To Previous Page

Cleaning the brewing unit core

Danger

• Before brewing unit cleaning, ensure to turn off the appliance first.

• Manually clean the unit with water only! Never use a dishwasher or any

detergent.

• The brewing unit core should be cleaned at least monthly. Press the release button to open the door

then pull out the brewing unit core.

• Immerse the unit in water for about 5 minutes, then rinse thoroughly and dry well.

• Check the brewing unit core has been reset to the original position (arrow pointing to the triangle

point), then push the brewing unit core inside until it is clicked into place.

• Close the door.

GM949_EN_A5_v1_20240528.indb 16GM949_EN_A5_v1_20240528.indb 16 2024/5/28 11:272024/5/28 11:27