Thermostat
Engine coolant temperature is controlled by a thermostat
in the engine coolant system. The thermostat stops the
flow of coolant through the radiator until the coolant
reaches a preset temperature.
When
you
replace your thermostat, an ACS thermostat
is recommended.
Power Steering
Fluid
:i
How
To
Check Power Steering Fluid:
Unscrew the cap and wipe the dipstick with a clean rag.
Replace the cap and completely tighten it. Then remove
the cap again and look at the fluid level on the dipstick.
When the engine compartment is hot, the level
When the engine compartment is cool, the level
What
to
Add:
Refer to
the
Maintenance Schedule to determine what
kind
of
fluid
to
use.
See “Recommended Fluids and
Lubricants” in the Index.
should be at the
“HOT”
mark.
should be at the
“FULL
COLD” mark.
When adding power steering
fli
or
making
a
complete fluid change, always use the proper
fluid. Failure
to
use the proper fluid can cause
leaks and damage hoses and seals.
To Next Page
Loading...
