10-92 Vehicle Care
This vehicle will have a slide in
fastener or a screw in fastener.
Screw in Fastener
1. Turn the wrench
counterclockwise to
remove the fastener.
2. Replace the fastener with the
one provided in the foam.
3. Turn the wrench clockwise to
tighten the fastener.
4. Replace the foam, jack and
tools, and the tire.
5. Turn the retainer nut clockwise
to secure the tire.
6. Place the floor cover on the
wheel.
1. If the flat tire is larger than the
spare tire, use the longer
mounting bolt from the tool bag.
Slide in Fastener
2. Slide the shorter bolt to remove
it from the floor and insert the
longer one.
3. Replace the jack and tools in
their original storage location.
4. Place the tire, lying flat, facing
up in the spare tire well.
5. Turn the retainer nut clockwise
to secure the tire.
6. Place the floor cover on the
wheel.
To store the compact spare tire,
use the shorter mounting bolt.
The compact spare is for temporary
use only. Replace the compact
spare tire with a full-size tire as
soon as you can.
To Next Page
Loading...
