DIC Buttons
The buttons are the set/reset,
customization, vehicle information,
and trip/fuel buttons. The button
functions are detailed in the
following pages.
V (Set/Reset): Press this button to
set or reset certain functions and
to turn off or acknowledge
messages on the DIC.
U (Customization): Press this
button to customize the feature
settings on your vehicle. See DIC
Vehicle Customization on page 3-57
for more information.
T (Vehicle Information): Press
this button to display the oil life,
park assist on vehicles with
this feature, units, tire pressure
readings on vehicles with this
feature, Remote Keyless Entry
(RKE) transmitter programming, and
compass calibration and zone
setting on vehicles with this feature.
3 (Trip/Fuel): Press this
button to display the odometer, trip
odometers, fuel range, average
economy, timer, fuel used,
and average speed.
Vehicle Information Menu
Items
T (Vehicle Information): Press
this button to scroll through the
following menu items:
OIL LIFE
Press the vehicle information button
until OIL LIFE REMAINING
displays. This display shows an
estimate of the oil’s remaining useful
life. If you see 99% OIL LIFE
REMAINING on the display, that
means 99% of the current oil
life remains. The engine oil life
system will alert you to change the
oil on a schedule consistent with
your driving conditions.
When the remaining oil life is low,
the CHANGE ENGINE OIL
SOON message will appear on the
display. See “CHANGE ENGINE
OIL SOON” under DIC Warnings
and Messages on page 3-48.
You should change the oil as soon
as you can. See Engine Oil on
page 5-11. In addition to the engine
3-42 Instrument Panel
To Next Page
Loading...
Need help?
General
