If a tire goes flat, avoid further tire
and wheel damage by driving slowly
to a level place and stopping.
1. Turn on the hazard warning
flashers. See Hazard Warning
Flashers on page 3-5.
2. Park the vehicle. Set the parking
brake firmly and put the shift
lever in P (Park).
3. Turn off the engine.
4. Inspect the flat tire.
{ CAUTION
Lifting a vehicle and getting under
it to do maintenance or repairs is
dangerous without the appropriate
safety equipment and training. If a
jack is provided with the vehicle, it
is designed only for changing a flat
(Continued)
CAUTION (Continued)
tire. If it is used for anything else,
you or others could be badly
injured or killed if the vehicle slips
off the jack. If a jack is provided
with the vehicle, only use it for
changing a flat tire.
This vehicle may come with a jack
and spare tire or a tire sealant
and compressor kit. To use the jack
and spare tire, see Changing a
Flat Tire on page 5-71. To use the
tire sealant and compressor kit,
see Tire Sealant and Compressor
Kit on page 5-57.
Tire Sealant and
Compressor Kit
{ CAUTION
Idling a vehicle in an enclosed
area with poor ventilation is
dangerous. Engine exhaust may
enter the vehicle. Engine exhaust
contains Carbon Monoxide (CO)
which cannot be seen or smelled.
It can cause unconsciousness
and even death. Never run the
engine in an enclosed area that
has no fresh air ventilation. For
more information, see Engine
Exhaust on page 2-30.
Service and Appearance Care 5-57
To Next Page
Loading...
Need help?
General
