4. To increase the time or date, do
one of the following:
• Press the pushbutton below
the selected label.
• Press ¨ SEEK.
• Press \ FWD.
• Turn f clockwise.
5. To decrease the time or date, do
one of the following:
• Press © SEEK.
• Press s REV.
• Turn f counter-clockwise.
Changing the Time and Date
Default Setting
To change the time default setting
from 12 hour to 24 hour or to
change the date default setting from
month/day/year to day/month/year:
1. Press
G and then the
pushbutton located under the
forward arrow that displays
on the radio screen until the time
12H (hour) and 24H (hour),
and the date MM/DD (month and
day) and DD/MM (day and
month) displays.
2. Press the pushbutton located
under the desired option.
3. Press
G again to apply the
selected default, or let the screen
time out.
3-66 Instrument Panel
To Next Page
Loading...
Need help?
General
