6
F
Optional equipment
Power Driver’s Seat
A. Lumbar Adjustment
Press the small control to adjust the lumbar
support.
B. 6-way Seat Adjustment
Move the large control to move the seat
forward or rearward and to tilt, raise or
lower the seat.
C. Seatback Recline Adjustment
Lithelevertoadjusttheseatbackposition.
Memory SeatF
Set Memory Positions
1. Adjust the driver’s seat and power outside mirrors to the desired positions.
2. Press and release the MEM (Memory) button (D). A beep will sound.
3. Immediately press and hold button 1 or 2 until two beeps sound.
Recall Memory Positions
Press and hold button 1 or 2 until the stored position is reached.
Note: To change the memory recall settings, go to Settings > Vehicle > Comfort and Convenience >
Auto Memory Recall or Easy Exit Driver Seat.
Folding Front Passenger Seat
With the head restraint lowered and the seat moved as far back as possible, pull the
reclineleverontheoutboardsideofthefrontpassengerseattofoldtheseatat.
Folding Rear Seats
1. Unbuckle the seat belts and return them to
their normal stowed position.
2. Lower the head restraints.
3. Pull up the tab (E) located at the center
front of the seat cushion.
4. Pull up the rear edge of the seat cushion
and tilt it forward.
5. Pull the lever (F) on top of the seatback.
When the red marking is visible, the seat-
back is unlatched.
6. Fold down the seatback.
7. When unfolding the seats, make sure the
seat belt buckles are accessible above
the seat cushions.
SEATS
See Seats and Restraints in your Owner's Manual.
A
B
D
C
E
E
F
To Next Page
Loading...
Need help?
General
