In Brief 1-7
To adjust a power seat, if equipped:
.
Move the seat forward or
rearward by sliding the
control (A) forward or rearward.
.
Raise or lower the front or rear
part of the seat cushion by
moving the front or rear of the
control (A) up or down.
.
Raise or lower the entire seat
by moving the control (A) up
or down.
See Power Seat Adjustment on
page 3‑5 for more information.
To raise or recline the seatback, tilt
the top of the control (B) forward or
rearward. See Reclining Seatbacks
on page 3‑6.
Press the front or rear of the
control (C) to increase or decrease
lumbar support. See Lumbar
Adjustment on page 3‑5.
Heated Seats
Heated Front Seats
The buttons are on the climate
control panel. To operate, the
ignition must be on.
Press
M or L to heat the driver or
passenger seat cushion and
seatback. Indicator lights on the
climate control display show the
temperature setting.
For more information see Heated
Front Seats on page 3‑8.
Head Restraint
Adjustment
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.
For more information see Head
Restraints on page 3‑2 and Seat
Adjustment on page 3‑4.
To Next Page
Loading...
