9-38 Driving and Operating
If d comes on and stays on, reset
the system.
To reset:
1. Stop the vehicle.
2. Turn the engine off and waiting
15 seconds.
3. Start the engine.
If
d still comes on and stays on, the
vehicle needs service.
.
To turn off both StabiliTrak and
TCS, press and hold
d, located
on the instrument panel, until
g
illuminates and the appropriate
DIC message is displayed. See
Ride Control System Messages
on page 5‑29.
When StabiliTrak is turned off,
the system will not assist with
directional control of the vehicle
or limit wheel spin. Driving
should be adjusted accordingly.
See Electronic Stability Control
(ESC) Off Light on page 5‑18 for
more information.
.
Press and release d again to
turn the system back on.
If cruise control is being used when
StabiliTrak activates, cruise control
will automatically disengage. Press
the cruise control button to
reengage when road conditions
allow. See Cruise Control on
page 9‑40 for more information.
Interactive Drive Control
System
The vehicle may have the
Interactive Drive Control System
(IDCS). IDCS adapts to the driving
style and preference of the driver
within one of three driving modes:
Standard: Use for normal city and
highway driving. This setting
provides precise, comfortable
handling. This is a fully automatic
mode for city and highway driving.
To Next Page
Loading...
