Buick Regal 2018 - License Plate Lamp

Buick Regal Owner Manual (GMNA-Localizing-U.S./Canada-10999315) -
2018 - CRC - 9/11/17
Vehicle Care 287
2. Remove the rear cargo area
trim panel push pin.
3. Pull the rear cargo area trim
panel back to gain access to
the taillamp assembly.
4. Remove the two nuts that
secure the taillamp assembly.
5. Remove the taillamp assembly
and disconnect the wiring
harness connector.
6. Turn the bulb socket
counterclockwise to remove it.
7. Pull the bulb from the socket.
8. Install a new bulb.
9. Turn the bulb socket clockwise
to install it.
10. Reverse Steps 2–4 to reinstall
the taillamp assembly.
License Plate Lamp
Lamp Assembly
Bulb Assembly