Buki PV07 - Photo Mode; High Temperature; Video Mode

photo Mode
video Mode
(with MicRo-sd/tF caRd inseRted only)
high teMpeRatuRe
1. Choose whether you want to take a standard photo or a sele.
Use the key to switch modes
2. Press the shuer release key to take the photo.
N.B. : If the logo appears on the screen, your photo will be
printed instantly. To enable/disable instant prinng, simply press
the key .
3. If does not appear on the screen, you can view your photo
aerwards by pressing the Back buon .
4. If you like the photo, press the key and press it a second me
to print.
5. If you select the other two opons and press again, you will
delete the viewed photo or all les on the card. If you do not wish
to print or delete a le, press Back to return to shoong mode.
1. Press the key to switch to video mode. Press the key again to
revert to photo mode.
2. Press the shuer release buon to start the video.
3. When you are done, press the shuer release buon again
to stop lming.
4. Press the key to view your video. Press the shuer release
buon to read the le.
5. Press and select “Delete” to delete the le. Select “Delete all”
to delete all les saved on the SD/TF card.
The device uses the same thermal technology to print photos as ll
receipts in stores. There is no need for ink!
If you take around een photos in succession, a message will
appear: “High temperature”. Leave the device to cool down for 5
minutes and you can start again.
11