Use the USB-C cable provided to charge the camera. The indicator
light is red while charging and turns green when the device is fully
charged.
Charging takes approx. 2.5 hours.
To transfer your photos to a computer, use the USB-C cable
provided.
chaRging the device
tRansFeRRing photos
If you wish to print the photos, the ideal format
suitable for this device is the standard 10 x 15 cm
format.
When viewing the photos on a computer monitor,
the photos are enlarged and the quality may seem
poor but don’t worry, it is easily sucient for your
child to print 10 x 15 cm photos.
Burst:
This mode lets you take 3 photos in succession. To acvate it, go
into , select “THREE Photo” and press OK.
Print Shade:
In the menu , select the “Print Shade” funcon. The opon you
select will determine the level of contrast in the photos you print
from the device.
In the menu , you can also adjust the brightness and me,
format the micro-SD/TF card and adjust the key volume, etc.
13