Getting Started
Before operating the air purifier
Carefully take out your air purifier from the box and remove all
packaging materials.
Place the unit on a firm, level, and horizontal surface.
Before using it for the first time, please open the bottom cover
and take out the filters, remove the wrapping bag of the filters,
then insert the filters and close the cover (See chapter “Replacing
the filters”).
Plug the power cord into the right voltage AC outlet.
Make sure the side with the clip is pointing towards outside when
installing filters.
Wash your hands thoroughly after installing filters.
If you need any help during setting up, please feel free to contact
us via email : bulex@afterservice.vip
Step 1:
Step 2:
Step 3:
Step 4:
Notes
To Next Page
Loading...
