Introduction
INTRODUCTION
InTroduCTIon
Welcome to the world of increased power, performance and economy brought to you by the leader in perfor-
mance, Bully Dog Technologies. This set of instructions outlines have to install and operate both the Power Pup
downloader with and without the Outlook Monitor on the y.
Note: This instruction set and the downloader are made exclusively for the 5.9L Dodge Cummins engine ’03-’06. This
module will not work on any other vehicle other the stated make, model or year.
Note: There is no combo package for the ’06 5.9L Cummins. However, the Outlook Monitor (Part #40166) is compatible
and will work with the Power Pup.
BILL OF MATERIALS
1. Power Pup Downloader
2. OBD II Cable
3. OutLook Monitor with Main Harness
4. Pyrometer Probe
5. Windshield Mount
6. Pillar Pod Mount
7. OBD II Connector & Harness
8. Fuse Jack
9. 90° Connector
10. Zip Ties
TOOLS NEEDED
• Flat Head Screw Driver
• Phillips Screw Driver
• Wire Strippers
• Electric Drill
• 5/16” Drill Bit
• 1/8” Pipe Tap
• 9/16” Wrench
• 5/8” Wrench
• Electrical Tape
1.
2.
5.
7.
3.
6.
8.
10.
9.
4.