Need help?Do you have a question about the Bully Dog Power Pup and is the answer not in the manual?
General| Brand | Bully Dog |
|---|---|
| Model | Power Pup |
| Category | Automobile Electronics |
| Language | English |
Describes the OutLook monitor main harness, its connectors, and thermocouple wires.
Details the OBD II Harness, its plugs, and the yellow power wire for the OutLook monitor.
Describes the Pyrometer Probe, its steel braded cable, and wire connections.
Details the steps for connecting the OBD II plug and the yellow power wire for the OutLook monitor.
Explains how to route the OutLook Main harness behind weather stripping and connect it to the OBDII Harness.
Details how to drill and tap the exhaust for the Pyrometer Probe and connect it to the harness.
Provides detailed steps for drilling, tapping, and mounting the Pyrometer Probe in the pre-turbo exhaust location.
Provides detailed steps for drilling, tapping, and mounting the Pyrometer Probe in the post-turbo exhaust location.
Configures the maximum exhaust gas temperature that triggers an automatic engine de-fuel.
Sets a maximum transmission temperature to automatically de-fuel the engine for protection.
Provides step-by-step instructions for recovering the downloader if it enters recovery mode.
Guides the user through calibrating the pyrometer probe for accurate de-fuel level settings.
Offers solutions for common problems encountered with the OutLook monitor, including connection and display issues.
To Next Page
