• Loosen the faucet nut to rotate the faucet
handle facing upwards.
• Route the faucet tube through the right
side panel.’
• Ensure there are no kinks in the tubing.
STEP 13
• Attach the faucet tube to the faucet shank.
• Secure the tube to the shank using the
hose snap that was removed in step 4.
STEP 14
ICB SH Faucet Side Car Installation Instructions
• Secure the cover to the faucet side car
using the screws that were removed in
step 3.
STEP 15
• Place the front panel on the brewer.
STEP 16
• Secure the front panel to the brewer using
the screws removed in step 1.
STEP 17
• Faucet side car relocation is complete.
STEP 18
Position Upright
Route Tube
Connect to
Shank
Secure with Clamp
To Previous Page
Loading...
