Bunn IMIX-3 Illustrated Parts Catalog

ITEM PART NO. QTY. DESCRIPTION
13
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
- 37010.1001 1 Hopper Assy (Includes one each of items 1-13)
1 36653.0001 3 Lid, Hopper
2 32337.0000 6 Mixing Blade
3 32386.0001 3 Disk, Agitator (30 Tooth)
4 28067.0000 3 Bushing, Auger Drive Shaft
5 26940.0002 3 Shaft, Auger Drive
6 37011.0001 3 Hopper
7 39442.0000 3 Auger, Wire
8 25903.0000 3 Elbow, Ejector
9 25743.0000 3 Locknut
10 36772.0000 3 Coupling, Hex (Early models only)
11 36774.0000 3 Spring, Hopper Coupling
12 36770.0000 3 Coupling, Auger Drive
01326.0002 3 Screw, Truss Head #10-32 x .25" (Late models only)
13 36771.0000 3 Shaft, Auger Drive Coupling (Early models)
37539.1000 3 Shaft, Auger Drive (Late models)
14 36970.0000 1 Panel, Hopper Support
01311.0000 2 Screw, Truss Head #8-32 x .25" Locking
15 20960.0000 3 Screw, Shoulder #6-32 x .375"
00991.0002 3 Nut, Elastic Lock #6-32
16 - - - - - - - - - See COVERS, PANELS & DRIP TRAYS
17 37037.0000 3 Gearmotor Assy, Auger (Each includes items 18 thru 21)
01311.0000 9 Screw, Truss Head #8-32 x .25"
18 32654.0000 1 Magnet Hub, 8 Pole #10 ID x 1.0" OD
01512.0000 1 Lockwasher, Ext Tooth #10
00991.0003 1 Nut, Elastic Lock #10-32
19 33608.1000 1 Sensor Assy, RPM
02336.0000 2 Screw, Truss Head #4-40 x .38"
20 26401.0000 1 Dust Seal, Hopper Motor
21 36773.0000 1 Plate, Auger Drive
22 37682.0000 3 Housing Assy, Sensor CB (Each includes items 23 thru 26)
01315.0000 3 Screw, Truss Head #8-32 x .38"
23 36114.1000 1 CB Assy, Powder Sensor (Order item 22)
38958.1000 1 CB Assy, Powder Sensor (Order item 22) (RoHS Compliant)
24 00970.0000 1 Nut, Keps #8-32
25 36243.0000 1 Housing Sensor CB
26 36764.0000 1 Spacer, Circuit Board
27 35260.0000 3 Cable Mount, Adhesive (Not Illustrated)
AUGER DRIVE AND HOPPER ASSEMBLY
37509 090707

Bunn IMIX-3 Specifications

General

Brand	Bunn
Model	IMIX-3
Category	Coffee Maker
Language	English