Bunn ITCB - Plumbing Requirements; Plumbing Hook-Up; Tank Drain Procedure

ITEM PART NO. QTY. DESCRIPTION
7
* Indicates the part number listed is OBSOLETE. ^ Indicates the part number listed is for reference only.
13 34072.0000 1 Decal, Power Cord Warning
14 00986.0000 1 Decal, Warning - Electrical
15 00656.0000 1 Decal, Comply to Plumbing Code
16 36362.0000* 1 Base, Early Models w/Trim (Order New Style Base 36362.0001)
36362.0001 1 Base
17 25137.0001 4 Foot
24600.0000 - Foot Kit, Set of 4
18 36412.0000 1 Rail, Stop
00970.0001 2 Nut, Keps #8-32
19 36461.0000 1 Guide Rail, Left
00970.0001 2 Nut, Keps #8-32
20 36462.0000 1 Guide Rail, Right
00970.0001 2 Nut, Keps #8-32
21 36361.0000 1 Trim, Base Cover
01308.0002 2 Screw, Truss Head, Locking #6-32 x .25˝
02332.0005 2 Screw, Hex #6 x .38"
22 01592.0001 1 Snap Bushing
23 39175.0000 1 Decal, Warning Overlay Graphic
24 37881.0000 2 Decal, No Serviceable Parts
25 25151.0000 1 Shield, Insulator (Adhesive Back)
26 29504.0005 6 Shoulder Screw, 8-32 x .29
00991.0000 6 Nut, Elastic Lock 8-32
27 34118.0001 1 Bracket, Tank Support
01317.0003 2 Screw, Truss Head #8-32 x .375˝
HOUSING, TRUNK, BASE AND PANELS
36747 110107