3
TABLE OF CONTENTS
Why BUNN Brews Better ....................... 3
BUNN Velocity Brew Initial Setup .......3-4
How to Brew Better ................................. 5
Brew Better Tips ....................................... 6
Cleaning and Maintenance ................... 7-8
Draining the Brewer ................................. 8
More About Your Brewer ........................ 9
Troubleshooting ........................................10
Authorized Service and Accessories ......11
Limited Warranty .....................................12
WELCOME
BUNN
®
Velocity Brew
™
is different from any brewer you’ve used before. Unlike ordinary
coffee makers, it features an internal hot water tank that keeps water at the right brewing
temperature – so it’s always ready to brew a perfect pot of coffee in just 3 to 4 minutes.
WHY BUNN BREWS BETTER
BUNN VELOCITY BREW VS. TYPICAL DRIP
BUNN VELOCITY BREW INITIAL SETUP
Before you brew coffee for the first time, you must fill the internal hot water tank with water
and let it heat to the correct brewing temperature. To prevent damage to your brewer, DO
NOT PLUG IN before completing these simple steps.
WARNING: DO NOT PLUG IN BREWER UNTIL STEP 5!
Improper setup will result in permanent damage to your
brewer and void the limited warranty.
Before filling brewer with water, record its Model Number and Date Code in the Use &
Care Manual. This information is located on the lower back, bottom of your brewer or
etched on each side of the metal prongs of the power cord.
To Next Page
Loading...
Need help?
General
