Page 12
PROGRAMMING THE BREWER (cont.)
PROGRAM FUNCTIONS - LEVEL 2
There are three methods of programming the
various brewing parameters of the SINGLE SH with
Smart Funnel
®
Brewer.
METHOD 1:
Using a Smart Funnel and a G92T DBC Grinder:
Certain coffee NAMES are stored in the G92T
DBC's memory. When a particular name of coffee is
ground into the Smart Funnel, that name and the batch
size selected are transferred from the grinder to the
programming chip located in the funnel's handle. The
funnel is then inserted into the brewer's funnel rails.
The sensor coil on the brewer reads the information
contained in the handle. This then allows the operator
to set the BREW VOLUMES, BYPASS PERCENTAGES,
PULSE BREW TIMES, PREINFUSION TIMES and
DRIP-OUT TIMES for that particular coffee NAME.
Each coffee NAME can be set individually to provide
optimum brewing quality.
METHOD 2:
Using a RECIPE CARD to enter all of the brew set-
tings at one time:
If using a coffee flavor not in the G92T DBC's
memory, the customer can obtain a RECIPE CARD
from the factory with all the information needed to set
up that particular coffee flavor. This includes the name
of the coffee, BREW VOLUMES, BYPASS PERCENT-
AGES, PULSE BREW TIMES, PREINFUSION TIMES,
and DRIP-OUT TIMES.
METHOD 3:
Not using a Smart Funnel and/or a G92T DBC
Grinder:
This allows the operator to enter ONE set of brew-
ing parameters in the event a Smart Funnel and/or a
G92T DBC is not used with the SINGLE SH Brewer.
This is referred to as a NO NAME coffee flavor. If the
brewer does not read the information in the funnel
handle, it automatically selects the NO NAME brewing
parameters set up prior to brewing. This includes the
BREW VOLUMES, BYPASS PERCENTAGES, PULSE
BREW TIMES, PREINFUSION TIMES and DRIP-OUT
TIMES for the three batch sizes.
RECIPES
This diagram allows for the creating, modifying,
or viewing of recipes in the brewer.
P2438
34025 012004
ARE YOU CREATING OR CHANGING A RECIPE FOR A
COFFEE NAME PREVIOUSLY USED IN THIS BREWER?
REFER TO NAME LIST
IN GRINDER MANUAL
CONTACT BUNN-O-MATIC
FOR ASSISTANCE
GO TO REVIEW RECIPES
AND FOLLOW INSTRUCTIONS
TO VIEW A LIST OF EXISTING RECIPES,
GO TO REVIEW RECIPES
AND FOLLOW THE INSTRUCTIONS
GO TO SET NEW RECIPE
AND FOLLOW THE
INSTRUCTIONS
YOU WILL ENTER
THE NO NAME
BREW SETTINGS
YOU WILL MODIFY AN
EXISTING RECIPE
DOES THE GRINDER HAVE THE
NAME IN ITS MEMORY?
FOLLOW INSTRUCTIONS
ON THE RECIPE CARD
HAVE YOU RECEIVED A RECIPE CARD
CONTAINING THE NEW RECIPE?
OR
NO
NO
DON'T KNOW
NO
YES
YES
YES
DON'T
KNOW
To Next Page
Loading...
Need help?
General
