Burcam 300514W User Manual

2190 Dagenais West TEL: 514.337.4415
LAVAL (QUEBEC) FAX: 514.337.4029
CANADA
H7L 5X9 info@burcam.com
INSTALLATION
INSTRUCTIONS
MODEL
300514W
LAUNDRY TUB
PUMP
Please read these
instructions
carefully. Failure
to comply to
instructions and
designed
operation of
this system,
may void the
warranty.
© 2015 BUR-CAM Printed in Canada 300284
Your pump has been carefully packaged at the
factory to prevent damage during shipping.
However, occasional damage may occur due
to rough handling. Carefully inspect your
pump for damages that could cause failures.
Report any damage to your carrier or your
point of purchase.
WWW.BURCAM.COM

Burcam 300514W Specifications

General

Model	300514W
Category	Water Pump
Voltage	115V
Cord Length	10 ft
Material	Thermoplastic
Type	Submersible
Power	0.5 HP
Discharge Size	1-1/4 in.
Outlet Size	1-1/4 in.
Switch Type	Float Switch

Summary

Safety Instructions

Safety Directives

Installation Steps

Step 1: Location and Preparation

Guidance on selecting a suitable location and preparing for installation.

Step 2: Union Installation

Step 3: Check Valve Installation

Step 4: Ball Valve Installation

Step 5: Discharge Pipe Run

Installation Steps Continuation

Step 6: Electrical Connection

Connecting the pump's switch and plug to a power receptacle.

Step 7: Test Pump Operation

Procedure for testing the pump's functionality with water.

Step 8: Adjust Discharge Flow

How to adjust the ball valve to regulate pump discharge flow.

Troubleshooting Guide

Trouble Checklist

Common issues, probable causes, and recommended actions for pump problems.