To Next PageTo Next Page
Need help?Do you have a question about the Burcam 300910 and is the answer not in the manual?
Read instructions carefully; failure to comply may void the warranty.
Comply with local electrical and plumbing codes for safety.
Use a separate circuit, fuse/breaker, and ground fault circuit.
Never remove the ground terminal on the three-prong plug.
Disconnect power before making adjustments; remove plug from receptacle.
Unit not designed for salt water; usage will void warranty.
Install pump at appropriate place for transfer, waterfall, or fountain.
Connect a 2-inch pipe to the desired discharge point.
Ensure suction screen is free of sand, rocks, or debris.
Repair parts can be ordered from authorized points of sale or BUR-CAM PUMPS.
Check fuse, breaker, plug, water level, or motor for motor failure.
Check for jammed impeller, blocked inlet/outlet, or worn impeller.
Contact BUR-CAM for problems concerning installation or product issues.
General| Model | 300910 |
|---|---|
| Type | Submersible Sump Pump |
| Horsepower | 1/3 HP |
| Voltage | 115V |
| Max Head | 25 ft |
| Material | Thermoplastic |
| Cord Length | 10 ft |
| Maximum Head | 25 ft |
| Outlet Size | 1-1/4 inch NPT |
| Discharge Size | 1-1/4 inch NPT |
| Switch Type | Vertical Float |
| Maximum Flow Rate | 1800 GPH |
