2190 Boul. Dagenais West TEL: 514.337.4415
LAVAL (QUEBEC) FAX: 514.337.4029
CANADA
H7L 5X9 info@burcam.com
INSTALLATION
INSTRUCTIONS
MODEL
506121S
JET
PUMP
Please read these
instructions
carefully. Failure
to comply to
instructions and
designed
operation of
this system,
may void the
warranty.
Your pump has been carefully packaged at the
factory to prevent damage during shipping.
However, occasional damage may occur due to
rough handling. Carefully inspect your pump
for
damages that could cause failures. Report any
damage to your carrier or your point of purchase.
WWW.BURCAM.COM
Factory set voltage 115 V
Connection voltage changing:
Before changing the voltage connection:
A) Ensure the power to the pump is disconnected.
B) Open motor junction box cover.
C) Please select the up knob position for 115 V
or down knob position for 230 V.
D) Connect to appropriate voltage.
E) Close motor junction box.
© 2009 BUR-CAM Printed in Canada 506662
To Next Page
Need help?
General
