EasyManua.ls Logo

Burcam 506518SS User Manual

Burcam 506518SS
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
© 2018 BURCAM Printed in Canada 506516
INSTALLATION
INSTRUCTIONS
Please read these
instructions carefully.
Failure to comply
to instructions
and designed
operation of
this system,
may void the
warranty.
Your pump has been carefully packaged at
the factory to prevent damage during shipping.
However, occasional damage may occur due
to rough handling. Carefully inspect your pump
for damages that could cause failures. Report any
damage to your carrier or your point of
purchase.
MODEL
506518SS
AND BY-PRODUCTS LIKE
506547SS
506548SS,
ETC.
JET PUMP
506537SS
506538SS
506541SS
Factory set voltage 115 V
Connecting volatge changing :
Before changing the voltage connection :
A) Ensure the power to the pump is disconnected.
B) Open motor junction box cover.
C) Please select the up knob position for 115 V
or down knob position for 230 V.
D) Connect to appropriate power source.
E) Close motor junction box.
2190 Dagenais Blvd. West
Laval (Quebec)
Canada
H7L 5X9
Tel. : 514.337.4415
Fax : 514.337.4029
info@burcam.com
see us at www.burcam.com
Question and Answer IconNeed help?

Do you have a question about the Burcam 506518SS and is the answer not in the manual?

Burcam 506518SS Specifications

General IconGeneral
BrandBurcam
Model506518SS
CategoryWater Pump
LanguageEnglish

Summary

Installation Instructions

Model and By-Product Information

Details the specific pump model (506518SS) and compatible by-products for reference.

Jet Pump Critical Usage Warning

Emphasizes reading all instructions to ensure proper operation and avoid voiding the warranty.

Voltage Connection Setup Guide

Provides instructions for connecting the pump for 115V or 230V operation.

Safety and Compliance Instructions

Electrical & Plumbing Code Adherence

Stresses the importance of following local electrical and plumbing regulations for user safety.

Grounding and GFCI Outlet Requirements

Details essential guidelines for secure electrical connections using GFCI outlets and proper grounding.

Monthly Mandatory Pump Check-up

Outlines critical periodic inspections to ensure the pump's ongoing safety and operational integrity.

Required Materials for Well Installation

Lists all necessary components, fittings, and tools for a successful drilled well pump setup.

Pump Application and Features Overview

Shallow Well Installation Capabilities

Describes the pump's design for shallow wells and its performance capacity at 20 PSI.

Key Pump Technical Features

Highlights the pump's construction, motor, protective features, and operational specifications.

Installation Step 1: Location & Dry Run Prevention

Guides on selecting an appropriate installation site and the vital instruction to never run the pump dry.

Shallow Well Installation Procedures

Piping, Foot Valve, and Seal Assembly

Step-by-step guide on connecting pipes, foot valve, and installing the well seal into casing.

Pump Mounting and Suction Connection

Details the process of mounting the pump and connecting the suction pipe from the well.

Well Point Installation and Check Valve

Explains using well points for increased water supply and the necessity of a check valve.

Tank Installation Guidelines

Captive Air Tank Precharge Procedure

Instructions for installing and precharging captive air tanks for optimal system performance.

Tank Types: Epoxy, Glass, Galvanized

Discusses different tank materials, their benefits, and recommendations for use with jet pumps.

Electrical Connection and Setup

Wiring Diagram and Voltage Selection

Illustrates the electrical wiring connections and the process for selecting the correct operating voltage.

Pressure Switch Adjustment Best Practices

Provides guidance and crucial warnings for adjusting the pump's pressure switch settings.

Pump Repair and Replacement Parts

Component Identification for Servicing

Lists and visually identifies all individual parts of the pump for repair or replacement purposes.

Pump Troubleshooting and Support

Common Issues, Causes, and Solutions

A comprehensive checklist to diagnose and resolve typical pump operational problems.

End Consumer Contact Information

Provides contact details for the end consumer seeking further assistance or support.

Related product manuals