Burley Trailer - Hardware and Tools List; Hardware Bag Contents; Required Tools; Install Wheel Reflectors

3
I. Hardware Bag Contents and Tool List
IMPORTANT: Please verify that you have received all of the contents listed.
Do not proceed with assembly if any parts are missing; contact Burley im-
mediately for replacement parts.
Hardware Bag Contents
Wheel refl ectors:
(2) Clear wheel refl ector
(2) Self-tapping screw for mounting wheel refl ector
Wheel mounting hardware:
(2) 3/8" SAE fl at washer
(2) 3/8" SAE locknut
Rear refl ectors:
(2) Refl ector bracket
(2) Self-tapping Phillips screw, bracket
(2) Rear refl ector, red
(2) Self-tapping slotted screw, refl ector
Roll-bar hardware:
(2) Roll-bar knob
Envelope:
Burley Checklist
Warranty Card
Burley-Solo Owner’s Instruction & Safety Manual
Tools Required
Phillips screwdriver
9/16" socket and torque wrench
Flat blade screwdriver
II. Install Wheel Refl ectors
Using a slotted screwdriver, install the clear wheel refl ectors facing outward
on the tab provided on each wheel using the self-tapping screws in the
hardware bag.
NOTE: Optional alloy spoked wheels come with relectors already in-
stalled.