Burmester 218 - Page 45

218 POWER AMPLIFIER
45| 46
POWER OUTPUT**
**Power output measured with model 218-240 at 230 V~, 50 Hz.
POWER OUTPUT IN STEREO (IEC62368-1)
per channel:
2 Ω 400 W
4 Ω 275 W
8 Ω 165 W
PULSE POWER IN STEREO CEA per channel:
2 Ω 575 W
4 Ω 355 W
8 Ω 200 W
POWER OUTPUT IN MONO IEC 623681:
4 Ω 785 W
PULSE POWER IN MONO CEA:
4 Ω 1,165 W
Damping factor (100 Hz/4 Ω) > 1,500
Amplification Stereo/Mono 34.2 dB/40.2 dB
Input resistance sym/asym 1.9 kOhm/12 kOhm
Input sensitivity (1 % THD+N, 4 Ω) 770 mV
Power frequency response (-3 dB, 1/8 Power rating, 4 Ω)
< 5 Hz - > 180 kHz
THD+N (1 kHz/50 W/4Ω) < 0.0097 %
SNR (20 Hz - 20 kHz) > 81 dB
Subject to technical changes without notice