2 of 35
Warranty disclaimer
All information in the present documentation was prepared and compiled with great care and reproduced
subject to effective control measures. No warranty is provided for freedom from errors. We reserve the
right to make technical changes. The present information as well as the corresponding technical data can
change without notice. Reproduction of any part of this documentation or its processing or revision using
electronic systems is prohibited without the manufacturer‘s prior written approval.
Components, devices and measured value sensors made by burster praezisionsmesstechnik
(hereinafter referred to as "product") are the results of targeted development and meticulous
research. As of the date of delivery, burster provides a warranty for the proper condition and
functioning of these products covering material and production defects for the period specified
in the warranty document accompanying the product. However, burster excludes guarantee or
warranty obligations as well as any liability beyond that for consequential damage caused by
improper use of the product, in particular the implied warranty of success in the market as well
as the suitability of the product for a particular purpose. Furthermore, burster assumes no
liability for direct, indirect or incidental damages as well as consequential or other damages
arising from the provision and use of the present documentation.
To Next Page
Loading...