AIM-50™ Installation Manual − Wall Mount Version 5000145 A01 3
Introduction
Dear Installer,
Congratulations on your purchase of the AIM-50™ Examination Light!
The installation manual gives instructions on how to install the AIM-50™ Examination Light Wall
Mount Version. For instructions on operation, maintenance and further description of the product
please refer to the Operation & Maintenance manual.
Please read these installation instructions very carefully and follow the safety instructions and
requirements.
This product was designed and manufactured in the U.S.A. by:
Burton Medical Products
21100 Lassen Street
Chatsworth, CA 91311
U.S.A.
Questions?
Tel: (800) 444-9909
(818) 701-8700
Fax: (800) 765-1770
(818) 701-8725
www.burtonmedical.com
Copyright © 2008 Burton Medical Products
To Next Page
Loading...