Transport | 3
0870220060_MH0018A_-0001_IM_en 5 / 40
2.1 Operating Principle
The machine works on the claw principle.
2.2 Application
The machine is intended for the recirculation of hydrogen gases or gas mixtures of nitro-
gen/humid hydrogen.
The machine is intended to be used with a water separator upstream of the suction con-
nection. Liquid water permanently flowing through the process chamber will reduce its
lifetime in a proportion linked to the amount of that liquid water.
Conveying of other media leads to an increased thermal and/or mechanical load on the
machine and is permissible only after a consultation with Busch.
The machine is intended for the placement in a non-potentially explosive environment.
The machine is suitable for continuous operation.
Permitted environmental conditions, see Technical Data [►34].
3 Transport
Machine weight:
see the technical data or the nameplate
• Check the machine for transport damage.
If the machine is secured to a base plate:
• Remove the machine from the base plate.
To Next Page
Loading...
