How to fix a noisy BUSCH Mink MV 0060 C Water Pump?
If your BUSCH Water Pump is running very noisily, it could be due to: a low oil level, in which case you should top up the oil; or defective bearings, in which case you will need to repair the machine.
What to do if BUSCH Mink MV 0060 C doesn't reach usual pressure?
If your BUSCH Water Pump isn't reaching the usual pressure, it might be because the inlet screen is partially clogged, so you should clean it. Alternatively, the inlet filter cartridge might be partially clogged, so replace it. It is also possible that internal parts are worn or damaged, in which case you should repair the machine.
General| Model | MV 0060 C |
|---|---|
| Nominal Pumping Speed | 60 m³/h |
| Weight | 85 kg |
| Voltage | 200-240/346-415 V |
| Frequency | 50/60 Hz |
| Pumping speed | 60 m³/h |
| Type | Claw |
To Next Page
