EasyManua.ls Logo

BUSCH SECO SV 1010 C - User Manual

BUSCH SECO SV 1010 C
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Get technical data,
instruction manuals,
service kits
SECO
Dry-running Rotary Vane Vacuum Pumps and Compressors
SV 1010 C, SV 1016 C, SV 1025 C, SV 1040 D
SD 1010 C, SD 1016 C, SD 1025 C, SD 1040 D
Instruction Manual
0870569132 | -0006_en-US | Original instructions 10/27/2022

Table of Contents

Questions and Answers

  • J
    Julie ThomasAug 11, 2025
    Why is my BUSCH Water Pump running too hot?
    • D
      derrick96Aug 11, 2025
      Your BUSCH Water Pump may be running too hot due to several reasons. First, check for insufficient cooling by removing any dust and dirt from the machine. Also, make sure that the ambient temperature is not too high and is within the permitted range. Partially clogged internal filters (IIF, IDF) or a partially clogged inlet filter (if equipped) can also cause overheating. Replace the filter cartridge in such cases.
  • J
    Jerry KempAug 19, 2025
    What to do if my BUSCH Water Pump does not reach the usual pressure?
    • Z
      Zachary BensonAug 20, 2025
      If your BUSCH Water Pump isn't reaching its usual pressure, several factors could be responsible. Start by replacing the filter cartridge if the internal filters (IIF, IDF) or the inlet filter cartridge (if optional) are partially clogged. If one of the regulating valves (VRV, PRV) is jammed, contact Busch to dismantle, clean, check and reassemble the regulating valve. Check also for stuck vanes; free or replace them if necessary. Also, replace the vanes if they are worn. Finally, if you have the SV version, dismantle the discharge valve and change the felt washer if it's partially clogged.
  • A
    Andrea CameronAug 26, 2025
    How to fix a noisy BUSCH Water Pump?
    • V
      Vanessa CunninghamAug 27, 2025
      If your BUSCH Water Pump is running very noisily, first check the direction of rotation to ensure it is correct. If the direction is correct, the bearings may be defective, in which case you should contact Busch to repair the machine.
  • W
    William WalshSep 3, 2025
    How to troubleshoot a BUSCH Water Pump that does not start?
    • C
      crystaljonesSep 3, 2025
      If your BUSCH Water Pump isn't starting, the motor might not be getting the correct voltage, so check the power supply. If the power supply is correct, the motor may be defective, and you should contact Busch to repair the machine.

BUSCH SECO SV 1010 C Specifications

General IconGeneral
BrandBUSCH
ModelSECO SV 1010 C
CategoryWater Pump
LanguageEnglish

Related product manuals