3
Where to put your radio
It is important that you consider carefully in advance where your radio will be situated
and make sure that it is:
on a flat and stable surface
• within 1.8 metres of a power socket
• where you can fully extend the telescopic aerial
• away from bright sunlight or heat sources, such as a radiator
• not in a humid or very damp place such as a bathroom
Setting up
1. Connect the mains power lead into the socket on the bottom left of the back
of the radio and fully extend the radio aerial in a vertical position to obtain the
maximum signal strength.
Note: Only use the power supply provided. Using an unauthorised power supply
will invalidate your guarantee and may damage your radio.
2. Plug the power adaptor into the mains power wall socket and switch on.
‘Welcome to Digital Radio’ will be displayed.
3. Press and release the ‘Power’ button on the front of the radio. The first time you
switch your radio on it will automatically begin to scan for DAB radio stations. A
progress bar will show the progress of the scan and the number of stations found
during the scan will also be displayed. When the scan is complete your radio will
select the first available station and begin to play. Stations are listed in numerical
and then alphabetical order by default.
4. Note: The DAB radio station list is stored in the memory and so the next time you
switch your radio on, the station search does not take place. It is possible to scan
manually for stations. Please see page 6.
5. Inserting the batteries (optional). Before installing the batteries (not included)
please ensure that the Radio is unplugged from the mains power supply.
6. On the back of the radio, push the two tabs on the battery compartment down
and remove the battery cover. Insert 4 x 1.5V LR14 C-size batteries, making sure
to note the ‘+’ and ‘-‘ markings and position the batteries the correct way around.
Replace the battery cover, making sure it ‘clicks’ shut.
Note: For battery operation, please switch o the mains adaptor and remove the
mains power plug from the back of the radio.
Product Set Up
To Next Page
Loading...
