AX27 Clamshell Tent
The Bush Company www.thebushcompany.com
AX27 Instructions v2.0.docx Last Updated: 11/09/2023 11:51:00 AM
4.2 Installation Options
On the underside of your tent there are two full length foot extrusion rails that are used to secure
your tent to your chosen platform or load bars. The Universal Fitment Bracket Set that comes
with your tent includes 6 L-Brackets that can be mounted (3 per side) to either the inside (Option
1) or outside (Option 2) edges of the mounting rails along with long bolts and 6 heavy-duty
plates that can be used to clamp around the bars on your mounting platform.
Depending on your intended mounting solution may only need to use the L-Brackets in the
mounting kit and not the heavy-duty plates to clamp around your bars/platform.
In some cases, you may not need to use the Universal Fitment Brackets and will be able to slide
your mounting bolts into the central channel of the mounting rail (Option 3) and then insert the
bolts through your load bars.
IMPORTANT: the supplied nuts and bolts are stainless steel, so it is essential to use an anti-
seize product on the treads of the bolts (e.g.: Lanotec Type A grease, Nickel Anti-Seize Grease).
We also recommend NOT to use power tools when tightening the bolts to reduce the risk of
seizing an over tightening.
To Next Page
Loading...