22
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
PROGRAMME PROGRESS INDICATOR
The programme follow-up indicator shows the progress of the programme running. At the beginning of each
programme step, the relevant indicator LED comes on and the LED of the completed step goes off.
Drying:
• It remains on during the whole drying process until the drying level reaches “Cooling”.
Cooling:
• It lights up when the drying level reaches “Cooling” and remains on until the next step.
End:
• It lights up at the end of the programme.
During the Programme
If you open the door when the programme is running, the product will switch to standby mode. Once the door has been
closed, press the Start/Pause key to resume the programme.
Do not open the loading door when the programme is running. If you have to open the door, do not keep it open for a
long time.
Programme End
Once the programme is over, the warning LEDs for Start/Pause, water tank level, filter cleaning and heat exchanger
cleaning will turn on. Additionally, an audible warning will be given at the end of the programme. You can remove
the laundry to make the machine ready for a new load.
IMPORTANT: Clean the lint filter after every programme. Empty the water tank after every programme.
IMPORTANT: If you do not take out the laundry after the programme has ended, the 1-hour Anti Crease phase will
automatically be activated. This programme rotates the drum at regular intervals to prevent creases
DRUM LIGHT INFORMATION
• This product includes LED Drum Light.The light works automatically when you open the door. And closes itself after a
while automatically.
• It is not an adjustable option for user to open or close it.
• Please do not try to replace or modify the LED Light.
To Next Page
Loading...
