Product support
Help is always at hand
Product support 40
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Energy Eciency
• You should operate the dryer to full capacity, but
make sure that it is not overloaded.
• When the laundry is being washed, the spin
speed should be at the highest level possible. This
will shorten the drying time and reduce energy
consumption.
• Make sure that the same kinds of laundry are dried
together.
• Please follow the recommendations in the user
manual for programme selection.
• For air circulation, leave an appropriate clearance
on the front and back sides of the Dryer. Do not
cover the grills on the front side of the machine.
• Unless necessary, do not open the door of the
machine when drying. If you have to open it, do not
keep it open for a long time.
• Do not add new (wet) laundry during the drying
process.
• Hairs and lint that detach from the laundry and merge
in the air are collected by the “Lint Filters”. Please make
sure that the filters are cleaned before and after each
use.
• For models with a Heat Pump, make sure that the
eat exchanger is cleaned at least once a month or
after each 30 uses.
• During the drying process, the environment where the
dryer is installed must be well ventilated.
To Next Page
Loading...
