Using your Viceroy combi fridge freezer
Before switching on
o Make sure that it has been installe d by a suitably qualified
person, as per the information cont ained in Vic eroy’s installation
instructions.
o After delivery, wa it for ei ght hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been distur bed during the trans portation
process to settle.
o The outside of the appliance and the removable accessories
contained within it, should be cl eaned with a solution of liquid
detergent and water.
o The interior of the app liance should be cleane d
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessori es
should be thorou ghly dr ied, after the cleaning
process has been completed.
o There can be an odour when you fi rst switch on the applia nce. It
will lessen as the appliance starts to cool.
During first use
o You should set the thermostat dial/dials to their ma ximum
settings for 24 hours after switching on the appliance for the first
time.
o When you first switch on the a ppliance, the compressor will run
continuously for approximatel y 24 hours or until t he fridge
freezer reaches a cool enough temperature.
o During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o You should then adjust the thermo stat dial/dials down to their
normal operating position.
o If the unit is switched off or unplugged, you must allow at least 5
minutes before re starting the a ppliance on the thermostat or
connecting it to your mains supply.
10
To Next Page
Loading...
