Installation
IMPORTANT: Before installation and usage read
all the instructions and make sure that the
voltage (V) and the frequency (Hz) indicated on
the rating plate are exactly the same as the
voltage and frequency in your home. The rating
plate can be found on the front left edge of the
inside of the refrigerator.
The manufacturer declines all responsibility in the event of the installer
failing to observe all the accident prevention regulations in force,
which are necessary for normal use and the regular operation of the
electric system.
Electrical connection
YOUR FRIDGE FREEZER IS INTENDED FOR FITTED
AND PERMANENT INSTALLATION.
We recommen d t hat the app liance is connected by a
qualified electrician, who is a membe r of the N.I.C.E.I. C.
and who will comply with the I.E.E. and local regulations.
o Your refrigerator comes supplied wi th a 13 amp plug fitted. If in
future you need to change the fu se in this plug, then a 13 amp
ASTA approved (BS 1362) fuse must be used.
o The wiring in the mains lead is coloured as follows:
Brown Live
Blue Neutral
Green and yellow Earth
o As the colours of the wires in th e appliance’s mains lead may not
correspond with the coloure d markings identifying the terminals
in your spur box, please proceed as follows:
The brown wire must be c onnected to the terminal ma rked “L”
(live), or coloured red.
The blue wire must be connected to the terminal marked “N”
(neutral), or coloured black.
The green and yellow wire must be connected to the terminal
marked “E” (earth), or by th e earth symbol, or coloured green
and yellow.
23
To Next Page
Loading...
