Bush BIFF7030 - Refitting the lower hinge; Screw cap removal technique; Screw hole cover removal and retention

h) Refit the lower hinge on
the opposite side.
o IMPORTANT: The
position of the hinge
pin must be changed
from the right hole
to the left hole
(correct position
shown in the
photograph
opposite).
i) Remove the screw cap
by using the bladed
screwdriver.
j) Remove the screw hole
covers.
o IMPORTANT: The
screw cap and screw
hole covers should
be retained for use
on the opposite side
of the appliance.
28