Using your Soundbar
Let’s get started
Using your Soundbar
15
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Controlling a paired device
Once connected you can either use the controls on
the audio device to begin playback, skip tracks etc.
Or you can use the control buttons on the sound bar &
remote.
1. The
PLAY/PAUSE button on the unit (2) or on
the remote when pressed will begin playback of
the selected track on the audio device. Press again
to pause playback.
2. To skip to the next track press the SKIP
button
on the unit (3) or remote.
3. To skip to the previous track press the SKIP
button on the main unit (4) or remote.
4. Any further operations must be done from the
audio device.
The volume output is effected by the volume level
on the audio source EG: Phone or laptop, so make
sure that is set to about 70-80% ( not too loud to
avoid distortion).
Bluetooth notes
• The operation range of bluetooth is approximately
10 meters (30 Feet). Any obstacles in the path
between devices may reduce this range.
• Only one Bluetooth device can be paired at a time.
• Not all Bluetooth devices are compatible.
To Next Page
Loading...
