43
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271.
Care and maintenance
Looking after your appliance
2. Open the saddle bracket (a) (with the aid of a
screwdriver) up to the end position.
a
3. Close the door until it almost reaches the fully closed
position and remove the door by pulling it towards you.
Maintenance
WARNING: The maintenance of this appliance
should be carried out by an authorised service
person or qualified technician only.
Changing the oven lamp
WARNING: Switch off the appliance and allow it to
cool before cleaning your appliance.
• Remove the glass lens, then remove the bulb.
• Insert the new bulb (resistant to 300 °C) to replace
the bulb that you removed (230 V, 15-25 Watt, Type
E14).
• Replace the glass lens, and your oven is ready for
use.
• The product contains a light source of energy
efficiency class G.
• Light source can not be replaced by end user. After
sales service is needed.
• The included light source is not intended for use in
other applications.
The lamp is designed specifically for use in
household cooking appliances. It is not suitable
for household room illumination.
Replaceable light source by a
professional
Other controls
• Periodically check expiratation date of the gas
connection pipe.
• Periodically check the gas connection pipe. If a
defect is found, contact an authorised service
provider to have it changed.
• If a defect is found while operating the control
knobs of the appliance, contact an authorised
service provider.
Care and maintenance
To Next Page
Loading...
