Why Bushnell GOLF Pro XE unit does not turn on?
If your Bushnell GOLF Measuring Instruments unit isn't turning on or the display isn't lighting up, first, try pressing the Power/Fire button. If that doesn't work, check the battery and replace it if needed. If the unit still doesn't respond, replace the battery with a new, good quality CR2 3-volt Lithium battery.
What to do if Bushnell GOLF Measuring Instruments target range cannot be obtained?
If you're having trouble getting a target range with your Bushnell GOLF Measuring Instruments, ensure the display is lit, and you're pressing the Power/Fire button. Also, confirm that nothing obstructs the objective lenses (the ones closest to the target) that emit and receive the laser pulses. Holding the unit steady while pressing the Power/Fire button is also important.
What to do if Bushnell GOLF Measuring Instruments powers down?
If your Bushnell GOLF Measuring Instruments unit powers down (display goes blank) when you try to use the laser, the battery is likely weak or of low quality. Replace it with a new 3-volt lithium battery (CR2).
General| Magnification | 6x |
|---|---|
| Waterproof | IPX7 |
| Slope Technology | Yes |
| PinSeeker with JOLT Technology | Yes |
| Type | Laser Rangefinder |
| Range | 5-1300 yards |
| Accuracy | ± 0.5 yards |
| Display | LCD |
| Battery Type | CR2 3V Lithium |
Details on the device's accuracy and factors affecting range measurement.
Instructions for battery activation and replacement.
Enabling/disabling the patented slope function for compensated distances.
Method for easy flag acquisition with vibration feedback.
How to enable or disable the slope function for USGA compliance.
Solutions for common issues like unit not turning on or target not obtained.
To Next Page
