To Next PageTo Next PageHow to fix Bushnell GOLF TOUR V6 SHIFT Measuring Instruments that won't turn on?
If your Bushnell GOLF Measuring Instruments isn't turning on or the display isn't lighting up: 1. Try pressing the Power/Fire button. 2. Check the battery and replace it if needed. If pressing the buttons doesn't do anything, swap the old battery for a good quality CR2 3-volt Lithium battery.
What to do if I can't get target range with Bushnell GOLF Measuring Instruments?
If you're having trouble getting a target range with your Bushnell GOLF Measuring Instruments, there are a few things to check: * First, make sure the display is lit up. * Next, confirm that you're fully pressing the Power/Fire button. * Also, ensure nothing is obstructing the objective lenses (the ones closest to the target) that send and receive the laser. * Finally, keep the unit steady while you press the Power/Fire button.
Why does my Bushnell GOLF Measuring Instruments power down when I try to use the laser?
If your Bushnell GOLF Measuring Instruments unit turns off, and the display goes blank when you try to use the laser, it's likely due to a weak or low-quality battery. Replace it with a new 3-volt lithium battery (CR2).
General| Magnification | 6x |
|---|---|
| Waterproof | Yes |
| Type | Laser Rangefinder |
| Visual JOLT Technology | Yes |
| Slope Compensation | Yes |
| PinSeeker with Visual JOLT | Yes |
| Slope Technology | Yes |
| Battery | CR2 3V lithium |
| Range | 5-1, 300 yards |
Lists key physical components of the Tour V6 laser rangefinder, including the slope switch, buttons, and battery compartment.
Details the various indicators shown on the Tour V6 display, such as aiming circle, distance units, battery level, and JOLT indicator.
Provides instructions for installing, replacing, and understanding the battery indicator levels for the rangefinder.
Guides users on how to activate the display, aim, and acquire distance readings using the Power/Fire button.
Explains how to adjust the eyepiece for clear focus of displayed data and icons.
Details how the Slope-Switch allows toggling between slope-compensated distances and USGA conforming mode.
Illustrates how to use slope mode to obtain angle-compensated ranges for accurate shot planning.
Explains the procedure to switch between yards (Y) and meters (M) for distance measurements.
Describes how to initiate JOLT technology to preview vibration and visual feedback for target confirmation.
Explains how PinSeeker ensures accurate flag targeting and how JOLT confirms the correct target.
Details the powerful BITE magnet for attaching the rangefinder to golf cart frames and its usage precautions.
Provides essential tips for cleaning and maintaining the multi-coated lenses of the rangefinder.
Offers solutions for problems like the unit not turning on, display issues, or failure to obtain a range.
Lists detailed technical specifications including dimensions, weight, accuracy, range, magnification, and power source.
Outlines regulatory compliance statements for FCC and Industry Canada regarding radio frequency emissions.
Details laser safety warnings, FDA compliance, and radiation exposure statements for user safety.
