24
Possible Cause
“TIMESTAMP” setting is off.
Recommended Solution(s)
• Go to the Settings Menu, select “TIMESTAMP”, select “ON”.
13) Viewscreen powers on, but no text appears.
Possible Cause
Batteries are low or dead.
Recommended Solution(s)
• Replace with new AA Alkaline or Lithium batteries.
14) Viewscreen comes on but then powers off.
Possible Cause
Viewscreen automatically turns off after 30 second unless a
control key is pressed.
Recommended Solution(s)
• Press a MENU button to reactivate screen.
15) Camera won’t retain settings.
Possible Cause
Setting changes have not been saved.
Recommended Solution(s)
• Make sure to press “OK” after changing the settings.
16) Moisture or ants inside camera.
Possible Cause
“DC in” plug is not firmly in place.
To Next Page
Loading...
