Need help?Do you have a question about the Bushnell PRIME L20 and is the answer not in the manual?
General| Image Resolution | 20 MP |
|---|---|
| Trigger Speed | 0.3 seconds |
| Detection Range | 80 feet |
| Flash Range | 80 feet |
| Recovery Rate | 1 second |
| Memory Card Support | Up to 32GB SD card |
| Flash | Low Glow |
| Battery Type | AA |
| Flash Type | Infrared |
| Battery Life | Up to 1 year |
| Operating Temperature | -20°C to 60°C |
Addresses potential issues with camera function or photo/video quality.
Provides contact information for troubleshooting assistance and support.
Instructions for inserting six AA batteries with correct polarity for power.
Guides on inserting, removing, and formatting SD cards for camera use.
Explains the three basic modes: OFF, ON, and AIM for camera operation.
Describes using AIM mode to view status and adjust settings via the LCD.
Guides on how to access and navigate the camera's setup menu.
Detailed steps for downloading photos and videos using a USB connection.
Camera captures images with no subject present due to PIR sensor.
Explains potential causes for reduced battery performance and longevity.
Solutions for camera stopping or not taking images due to SD card or power.
Troubleshooting steps for the camera failing to power up correctly.
To Next Page
