3
The Longest. The Most Accurate. The Most Consistent. The Best Ever.
WARNING: As with any laser device, it is not recommended to directly view the emissions for long
periods of time with magnied lenses.
INTRODUCTION
Parts Guide
1. BITE Magnet (see inset photo)
2. Mode Button
3. Power/Fire Button
4. Eyepiece Diopter Dial
5. Battery Compartment
6. Slope Switch
5
3
4
2
6
1
BITE MAGNET
1
HOW OUR DIGITAL TECHNOLOGY WORKS
RANGING ACCURACY
Note: You will get both longer and shorter maximum distances depending on the reflective properties of the
particular target and the environmental conditions at the time the distance of an object is being measured. The
color, surface finish, size and shape of the target all affect reflectivity and range. The greater the reflectivity of the
target, the longer the range. A white or silver object is highly reflective, for example, and allows longer ranges than
the color black, which is the least reflective color. A shiny or glossy finish provides more range than a dull one. A
small target is more difficult to range than a larger target. The angle to the target also has an effect. Shooting to
a target at a 90 degree angle (where the target surface is perpendicular to the flight path of the emitted energy
pulses) provides good range while a steep angle on the other hand, provides limited ranging. In addition, lighting
conditions (e.g. the amount of sunlight) will affect the ranging capabilities of the unit. The less light (e.g. overcast
skies) the farther the unit’s maximum range will be. Conversely, very sunny days will decrease the unit’s maximum
range.
ENGLISH
To Next Page
Loading...
