7
TROUBLESHOOTING
Never disassemble your laser rangender. Irreparable damage can result from unauthorized service attempts,
which also void the warranty.
If unit does not turn on, display does not illuminate:
•
•
If unit powers down (display goes blank when attempting to power the laser):
•
If target range cannot be obtained:
•
•
•
•
NOTE: The last range reading does not need to be cleared before ranging another target. Simply aim at the new target
using the display reticle, depress the Power/Fire button and hold until new range reading is displayed.
Technical Specications
Weight
Ranging Accuracy
Range
WARNING: This product uses a Lithium based battery. Lithium batteries can overheat and cause damage
if physically abused. Do not use batteries that are damaged or show signs of physical wear.
To Next Page
Loading...
