Page 5
Remove the remote control from the
winch when not in use and store in a safe,
dry place.
Do not wrap the rope around the load
and back onto itself. Always use a tree
trunk or winch extension strap.
Keep hands and clothing clear of the
winch, rope, and fairlead opening.
Never unplug the remote control when
winching a load.
To avoid insufficient power when
winching a load, the vehicle should be
running and in neutral.
Keep the remote control clear of the rope
at all times.
If noise or vibration occurs when running,
stop the winch immediately and inspect
or return it for repair.
The rope must be wound in an
under-wound orientation only to ensure
correct brake operation.
Always inspect the hook, latch and pin
prior to use. Do not use if there are any
signs of excess distortion or bending.
Ensure the pin of the hook is secured
using a correctly installed split/cotter pin.
To Next Page
Loading...
